3D Printer Accessories V6 Ruby Nozzle 1.75mm For Petg Abs Pei Peek 3d filament
The nozzle is subjected to a maximum torque of 5 N.m. Exceeding this torque will damage the brass inlay. If you don't have a torque wrench. Then it doesn't matter. Don't use too much force during the installation process, please try to control your strength.
colour:Red yellow
Item No.: Ruby nozzle 3D
Mounting type: external thread connection
Scope of application : 3D printer
Applicable models: Prusa i3 Mk3/LulzBot/
Synthetic gemstone parameters: (The following are only gem parameters)
Main physical and chemical properties:
Appearance: red crystal, no special smell
Purity: more than the 99.9%
Density: 3.9--4. 10g/cm3
Melting point: 2050 Celsius soil 50C4
Hardness: Mohs 9
Tensile strength: 0.18Gpa, compressive strength: 1.9Gpa
Coefficient of friction: 0.1 (dry friction coefficient with steel).
Anti-corrosion acidity: acid and alkali resistance at room temperature, not resistant to hydrofluoric acid at 300 Celsius.
A torque wrench is required during the installation of the nozzle. The nozzle is subjected to a maximum torque of 5 N.m. Exceeding this torque will damage the brass inlay. If you don't have a torque wrench. Then it doesn't matter. Don't use too much force during the installation process, please try to control your strength.
colour:Red yellow
Mounting type: external thread connection
Scope of application : 3D printer
Applicable models: Prusa i3 Mk3/LulzBot/
Synthetic gemstone parameters: (The following are only gem parameters)
Main physical and chemical properties:
Appearance: red crystal, no special smell
Purity: more than the 99.9%
Density: 3.9--4. 10g/cm3
Melting point: 2050 Celsius soil 50C4
Hardness: Mohs 9
Tensile strength: 0.18Gpa, compressive strength: 1.9Gpa
Coefficient of friction: 0.1 (dry friction coefficient with steel).
Anti-corrosion acidity: acid and alkali resistance at room temperature, not resistant to hydrofluoric acid at 300 Celsius.
A torque wrench is required during the installation of the nozzle. The nozzle is subjected to a maximum torque of 5 N.m. Exceeding this torque will damage the brass inlay. If you don't have a torque wrench. Then it doesn't matter. Don't use too much force during the installation process, please try to control your strength.
colour:Red yellow
We can do custom packing with plastic bag/box with different quantity and size .
We have most of the 3D printer parts of most popular 3D printer with no MOQ ,welcome to ask for our catalogue
| Brands | 1.75mm |
|---|
Write Your Own Review
Sign In
Create New Account