MK3 Aluminum HeatBed Dual Power 12V 24V High Temperature 120 Degree

Dimensions 220mm x 220mm x3mm ,300mm x 300mm x3mm,400mm x 300mm x3mm

Power: 200W (normal MK3 hotbed only have 120W, and reach 80Degree Max), this updated hotbed can reach 110 degree easily.

1 layer 35μm (1oz base) copper

Resistance between 1.4 and 1.6 ohm for the 12V

Resistance between 5.0 and 5.4 ohm for the 24V

100 degree Celsius possible for both 12V and 24V, the power are stable for both 12V and 24V.

With 15V on the 12V terminals will maintain approx. 115 degree Celsius without regulation

 Running 24V on the 12V terminals will heatup the heatbed to 100 degree in only 2 minutes (Your printer controller will regulate the power to the heatbed in order to get your preset temperature.)

120 degree Celsius max. temperature 。

"NTC" is for installing thermistor, 4,5 is for Welding thermocouple wires

The normal MK3 size is 214*214mm, the 4 positioning hole is very close to the four corners, the hot bed is easily broken during tranportation, and difficult to handle. This improved version, unchanged in 4 positioning holes, the size increased to 220*220, so that the positioning hole from the 4 corners to increase the distance, and made a circle chamfering, and is not easily broken.

Package included:

1 piece MK3 updated plate as our first picture shows in the listing